Experimental Investigations on the Behaviour of Pile Groups in Clay Under Lateral Cyclic Loading

Abstract

This paper presents the results of two-way cyclic lateral load tests carried out on model pile groups embedded in soft marine clay. The tests are conducted on 1 × 2, 2 × 2 and 3 × 3 pile groups having length to diameter ratio (L/D) of 15, 30 and 40 with the spacing to diameter ratio (S/D) of 3, 5, 7 and 9. The experimental results are presented in the form of load–deflection curves and bending moment profiles. Cyclic group efficiency, critical spacing, critical cyclic load level and cyclic p-multipliers are evaluated. It is found that the lateral capacity of the 3 × 3 group reduces by about 42% after 50 cycles of loading. The cyclic p-multipliers of 3 × 3 pile group are found to be 0.41, 0.25 and 0.29 for leading, intermediate and rear rows respectively. The test results are compared with the numerical analysis carried out by p–y method using GROUP program. The analysis carried out with experimentally evaluated p-multipliers predicts load—deflection and bending profiles of pile groups reasonably well, but underestimates the depth to maximum bending moment by about 15%.