Abstract
Biomass in the form of cashew nut shell represents a new and abundant energy source available in India. Cashew nut shell liquid (CNSL) can be used as an alternative fuel for diesel engine. In this work, the CNSL was subjected to thermal cracking process at different temperatures to produce biofuel. The product obtained is called the thermal cracked cashew nut shell liquid (TC-CNSL). Experiments are conducted with blends of this biofuel and diesel to study the performance, emission and combustion characteristics of a direct injection (DI) diesel engine. In this study, the chemical composition of thermal cracked cashew nut shell liquid (TC-CNSL) was determined using gas chromatography–mass spectrum (GC–MS) and Fourier transformed infrared (FTIR) spectroscopic techniques. The experiments were conducted on a four stroke, single cylinder, water cooled, DI, Kirloskar AV-1, diesel engine at a speed rate of 1500rpm. The brake thermal efficiency in neat diesel operation is high compared to neat biofuel (B100). The specific fuel consumption increased for neat biofuel compared to neat diesel. The HC and CO emissions decreased for biofuel blends compared to neat diesel. But the NOx emission increased for higher blends of biofuels namely B100 compared to diesel and lower blends. The rates of pressure rise and heat release are higher for B100 as compared to neat diesel. The combustion duration and ignition delay increased with neat biofuel as compared to neat diesel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.