Abstract
Effectiveness of aerospikes/aerodisk assemblies as retractable drag-reduction devices for large-angle blunt cones flying at hypersonic Mach numbers is investigated experimentally in hypersonic shock tunnel HST2 using a 120-deg apex-angle blunt cone. An internally mounted accelerometer balance system has been used for measuring the aerodynamic drag on the blunt cone with and without forward-facing aerospikes at various angles of attack. The measurements indicate around 55% reduction in drag for the blunt cone with flat-disk spike at zero degree angle of attack for a freestream Mach number of 5.75. Surface convective heat-transfer rate measurements have been carried out on the blunt cone with a flat-disk tipped spike of varying length in order to locate the shock reattachment point on the blunt-cone surface. The measured heat-transfer rates fluctuate by about ±20% in the separated flow region as well as near the reattachment point indicating the unsteady flowfleld around the spiked blunt cone. The shock structure around the 120-deg apex-angle blunt cone with a 12-mm-long flat-tipped aerospike has also been visualized using the electric discharge technique. The visualized shock structure and the measured drag on the blunt cone with aerospikes agree well with the axisymmetric numerical simulations
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
