Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s

Abstract

ABSTRACTThe use of Al-6063 SiCp metal matrix composites (MMCs) in electronic packaging applications, heat sinks for printed circuit boards and for microwave housings necessitates certain degree of machining operations to meet the specifications of the product. The various conventional and non-conventional machining processes had been used to machine the MMCs. But all such processes have their limitations in providing the desired outcomes. Therefore, the present research endeavor, a new process variant of ECDM for the machining of Al-6063 SiCp MMCs. The developed grinding assisted rotary disk electrochemical discharge machining (GA-RDECDM) process integrates the concept of triplex hybridization. In GA-RDECDM, an abrasive coated rotary disk was used as a tool electrode. The abrasive coated disk provides micro gaps between the tool electrode and work material surface and thereby it results in thin and stable gas film formation. The breakdown of thin and stable gas films produce high frequency, low intensity discharges and consequently improves the machining performance. The additional abrasion action imparted by rotating disk ensures the continuation of ECDM process. The influence of various process parameters including applied voltage, pulse on time, electrolyte concentration and the disk rotation rate on width over cut (WOC) and depth were experimentally investigated. Multi criteria optimization using desirability approach predicts the parametric combination of applied voltage of 99V, pulse on time of 3 ms, electrolyte concentration of 17%wt./vol. and disk rotation rate of 30 rpm as the optimum setting for fabrication of slits on the MMCs. The underlying process mechanism is also investigated and presented with appropriate illustrations. The major contribution of the present research work is the development of a novel method for the fabrication of the slits on MMCs.