Abstract

Studying the true triaxial deformation characteristics and progressive damage behavior of sandstone is of great significance for the stability control of roadways. Both the conventional triaxial test (CTT) and the true triaxial compression test (TTT) were conducted for sandstone to investigate its deformation characteristics and the variation laws of volume strain during the progressive damage process under different confining pressures. The conducted experiments showed that both the axial and lateral strains of the rock prior to failure under CTT conditions increased with increasing confining pressure. However, with increasing intermediate principal stress (σ2) under TTT conditions, both the axial strain, and the lateral strain (ε2) gradually decreased, and the lateral strain (ε3, expansion) first slow down and then accelerated. Moreover, the anisotropic characteristics first gradually weakened and then enhanced. The variation of the volume strain increment and the volume strain rate of rock combined with the acoustic emission activity and a three-dimensional rock theoretical model with microcrack defects were analyzed in detail. During the stable crack growth stage III, the volume strain increment and volume strain rate increased with increasing confining pressure under CTT conditions, while they decrease after the initial increase with increasing σ2 under TTT conditions. During the unstable crack growth stage IV, the volume strain increment increased sharply, while the volume strain rate gradually slowed down with increasing confining pressure under CTT conditions. The internal cracks of the rock were gradually suppressed and the lateral expansion was gradually constrained. The volume strain increment first increased followed by a decrease, and the volume strain rate gradually slowed down after a noticeable acceleration with increasing σ2 under TTT conditions. The internal micro-cracks gradually evolved from inhibition (in the planes parallel to plane 1–2 and plane 2–3) to accelerated expansion (the planes along the σ2 direction), and the lateral deformation first weakened and then strengthened.

Highlights

  • Www.nature.com/scientificreports mainly focused on the conventional triaxial stress state (σ1 > σ2 = σ3), the influence of the intermediate principal stress was ignored

  • A series of conventional triaxial and true triaxial compression tests for sandstone was conducted in this study using a self-developed true triaxial compression test system, combined with an acoustic emission (AE) testing technique[20,21]

  • A series of conventional triaxial and true triaxial compression tests for sandstone was conducted using a self-developed true triaxial compression test system combined with the AE testing technique

Read more

Summary

Introduction

Most research objects are granite, marble, or other hard rocks Because of their hard texture, scholars tend to be more concerned about the strength and the failure criteria of rock, while comparatively soft rocks, such as sandstone, remain largely unstudied. By investigating the true triaxial deformation characteristics of sandstone, the working mechanism and the deformation law of sandstone during the actual stress state can be understood effectively. This provides important engineering significance for the treatment of geological hazards of roadway surrounding rock. The deformation characteristics in the three principal stress directions and the variation laws of volume strain under different confining pressures during the progressive damage of rock were analyzed to uncover the root cause of variations in true triaxial deformation

Methods
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call