Abstract

Underground coal gasification (UCG) has been shown to be a promising method for deep coal resources. A series of complicated chemical reactions can induce a considerable change in the pore structure of coal and thus promote the UCG process in turn. Currently, most studies on the effect of elevated temperature on the pore structure of coal were not involved in an air atmosphere, bringing a series of difficulties to understanding the pore structure evolution of gasified coal in the UCG process. The objective of this work was to investigate the pore structure evolution of coal heated in nitrogen and air atmospheres at elevated temperatures. Thermogravimetry tests were first conducted to gasify coal samples, and then, the method scanning electron microscopy was used to observe the microscopic morphology of the pore structure. Besides, the effect of final temperature, atmosphere, pressure, and residence time on the thermal dynamics of coal at elevated temperatures was comprehensively discussed. Results indicated that the temperature range of a heating process of coal can be classified into three stages, 25–320 °C, 320–750 °C, and 750–1000 °C. For the three temperature ranges, drying, primary pyrolysis, and secondary pyrolysis can dominate, respectively, under a nitrogen atmosphere, while the combustion and gasification process will prevail at a high temperature under an air atmosphere. Because of mass loss, the coal was becoming porous during the heating process. Compared with the intact structure of coal when the temperature is lower than 300 °C, the pore space can interconnect under moderate-temperature conditions (500 °C) like a honeycomb, and then, only an ash framework remained under a higher-temperature condition (700 °C) under an air atmosphere. In comparison, the coal heated in a nitrogen atmosphere can gradually turn into a porous char. This investigation can provide some new insights into the pore structure evolution of gasified coal and contribute to the mechanisms of a UCG process.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.