Abstract

Vapor compression very high temperature heat pumps (VHTHPs) with low-GWP refrigerants have attracted enormous attention for waste heat recovery. To yield high temperature output, a water vapor twin-screw compressor with water-injection is developed and a VHTHP prototype is established to conduct the experimental investigation. The experimental results show that when condensation temperature increases from 111 °C to 150 °C, the COP of this VHTHP decreases from 6.10 to 1.96 at the evaporation temperature of 85 °C. The highest COP is about 6.10 with the heating capacity of 285 kW at 85 °C evaporation and 117 °C condensation temperature, respectively. The highest condensation temperature of this water vapor VHTHP can reach 150 °C with the COP of 1.96. At the same temperature lift, the COP increases with the output temperature increasing. That means this VHTHP is more suitable for higher output temperature with the same temperature lift. So this VHTHP can be used to supply pressured hot water or high temperature steam when the user is favorable. Considering the characteristic of high-efficiency and environment-friendly, this VHTHP is highly desirable and competitive.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call