Abstract
The indoor thermal comfort is the basic thing for each and every occupant, not only in tropical areas but also all over the world. It is necessary to make an energy efficient roof design and to improve the indoor condition of the building. This paper is focused on the roof design to develop the ventilation system so as to obtain low attic temperature without effecting the environment and keep the interior of the building cool. In the present study, four identical roof models were fabricated to carry out laboratory tests to evaluate their performances. In the roof models, aluminum (Al) tubes were used as a moving-air path (MAP) which acts as a ventilation channel. These channels allows the natural ventilation to take out hot air to the outside. In addition, an insulation layer and ventilation fans were integrated with the Al tubes to get better performance. For the combination of those features, the results revealed that the attic temperature was reduced remarkably, compared to the ordinary roof model. This comprehensive roof model will be the most suitable to the environment and applicable for its improved performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.