Abstract
This study aimed to understand the mechanical and interfacial properties of fiber-reinforced geopolymer (FRG) layer on the tension zone of normal concrete. A trial mix of FRG using local materials obtained in Hokkaido was investigated. Compression and splitting tensile tests on the FRG test pieces were conducted under different mixing procedures, constituents, volume fractions of the polyvinyl alcohol fiber, curing conditions, and ages. Flexural tests using FRG-normal strength concrete (NSC) composite specimens with different FRG layer thicknesses were carried out. By placing the FRG layer on the tension side of the composite specimen, the flexural strength and energy absorption were significantly increased. The flexural strength for the NSC alone was 3.5 MPa, while the FRG-NSC composite specimens showed higher flexural strengths of 6.1–6.6 MPa. Also, XRD, FTIR, and SEM analyses were carried out for the FRG samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
