Experimental Investigation on the Limit Load Estimation Method for Pipes Containing a Circumferential Surface Flaw With Complicated Shape

Abstract

When a flaw is detected in the stainless steel pipes at nuclear power plants during in-service inspections, the limit load estimation method provided in the codes such as JSME Rules on Fitness-for-Service for Nuclear Power Plants or ASME Boiler and Pressure Vessel Code Section XI can be applied to evaluate the integrity of the flawed pipe. However, in these current codes, the limit load estimation method is only derived for pipes containing a flaw with uniform depth, although many flaws with complicated shapes, such as stress corrosion cracks, have actually been detected in pipes. In order to evaluate the integrity of the flawed pipes in a more rational way, a limit load estimation method has been proposed by authors considering the complicated circumferential surface flaw in its shape. In this study, failure bending experiments are performed for stainless steel pipes containing a circumferential surface flaw with a complicated asymmetrical shape. The proposed method is verified by comparing with experimental results of failure bending moments obtained in this study and in previous experiments. It is observed that the predicted failure bending moments by the proposed method are consistent with the experimental results, and the proposed method is applicable to estimate the realistic load-carrying capacity of flawed pipes.