Abstract
The ferrotitanium alloy was prepared in the molten CaCl2 system, in which resolidified ilmenite and the graphite crucible were used as cathode and anode. In this study, the electrolytic voltage was fixed at 3.1V, and three different temperatures were applied: 850oC, 875oC and 900?C. Finally, the product was examined by SEM and XRD to determine the phase transformation after the electrolysis. The results show that the ilmenite was firstly reduced to Fe, and finally the TiFe alloy was formed. The intermediate products include CaTiO3, TiO2, Ti2O3, TiO, Fe, TiFe2, and Ti. Different product and structure can be obtained by changing temperature. According to thermodynamic calculation, the principal electroreduction products are Ti and TiFe2 and then Ti and TiFe2 are formed by interdiffusion which is governed by temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Mining and Metallurgy, Section B: Metallurgy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.