Experimental investigation on the effective thermal conductivities of different hydrate-bearing sediments

Abstract

The natural gas hydrate has been regarded as an important future green energy. Significant progress on the hydrate exploitation has been made, but some challenges are still remaining. In order to enhance the hydrate exploitation efficiency, a significant understanding of the effective thermal conductivity (ETC) of the hydrate-bearing sediment has become essential, since it directly controls the heat and mass transfer behaviors, and thereby determines the stability of hydrate reservoir and production rate. In this study, the effective thermal conductivities of various hydrate-bearing sediments were in-situ measured and studied. The impacts of temperature, particle size and type of sediment were investigated. The effective thermal conductivities of the quartz sand sediments before and after hydrate formation were in-situ measured. The results show the weak negative correlation of effective thermal conductivity of the quartz sand sediment on the temperature before and after the hydrate formation. The effective thermal conductivity of the hydrate-bearing sediment decreases with the increase of particle size of the sediment. The dominant effect of the type of porous medium on the characteristics of the effective thermal conductivity of hydrate-bearing sediment was highlighted. The results indicate that both the effective thermal conductivities of hydrate-bearing quartz sand sediment and hydrate-bearing silicon carbide sediment are weakly negatively correlated with temperature, but the effective thermal conductivity of hydrate-bearing clay sediment is weakly positively dependent on the temperature. In addition, the values of the effective thermal conductivities of various hydrate-bearing sediments are in the order of hydrate-bearing silicon carbide sediment > hydrate-bearing quartz sand sediment > hydrate-bearing clay sediment. These findings could suggest that the intrinsic thermal conductivity of porous medium could control the characteristics of effective thermal conductivity of hydrate-bearing sediment.