Abstract
Abstract The widespread use of adhesives in timber construction has negative implications for the end-of-life disposal or re-use of the structural timber components. To promote the circular bioeconomy, it is preferable to substitute adhesives with more sustainable alternatives such as wood-based connectors. Today, robotic fabrication technologies facilitate the development of dowel-laminated timber (DLT) products whereby hardwood dowels are used to connect timber laminates as a substitute to adhesives. In recent years, thermo-mechanical densification of wood has resulted in significant improvements in the mechanical performance of the wood. This modified product often termed compressed wood (CW) has a shape-recovery effect which may be beneficial for the development of DLT products and timber-timber connections with improved friction fit with time. To test the hypothesis, accelerated ageing tests were carried out on CW-timber and hardwood-timber dowel type connections subjected to variable climate conditions. Finally, the capacity of the connections or friction fit was assessed using pull-out tests. Results show that the shape-recovery effect leads to the continuous expansion of the CW dowels and facilitates a friction fit with the timber substrate yielding higher pull-out loads when compared to hardwood dowels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.