Abstract

Abstract In this study, the effects of the different concentrations of hydrochloric acid, hydrofluoric acid, and acetic acid and a surfactant on the physicochemical characteristics of coal, such as pore diameter distribution, pore fractal dimension, and chemical structures were studied. The wettability performance of the reagent-modified coal was proposed. The results demonstrated that the mineral dissolution rate of HF in the coal sample was much higher than those by HCl and HAC treatment, which increases the surface roughness of coal. With the increase in the concentration of a multicomponent acid solution, the number of micropores decreased and the number of macropores increased. Moreover, both fractal dimensions D1 and D2 of the coal sample treated with the multicomponent acid comprising 6% HCl, 6% HF, and 6% HAC (#3) were the smallest. This shows that compound reagent #3 is available to enhance the pore size distribution with a better effect than the other five ones. Compared with the raw coal (#7), treatment with high concentrations of HCl (#4) significantly decreased the contact angle on coal (#4), whereas treatment with high concentrations of HF or HAC (#6 or #5), significantly increased it.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.