Abstract

The flexural behavior of carbon fibre reinforced polymer (CFRP) reinforced concrete (RC) beams is investigated in this paper. For flexural strengthening of RC beams, total ten beams were cast and tested over an effective span of 3000 mm up to failure under monotonic and cyclic loads. The beams were designed as under-reinforced concrete beams. Eight beams were strengthened with bonded CFRP fabric in single layer and two layers which are parallel to beam axis at the bottom under virgin condition and tested until failure; the remaining two beams were used as control specimens. Static and cyclic responses of all the beams were evaluated in terms of strength, stiffness, ductility ratio, energy absorption capacity factor, compositeness between CFRP fabric and concrete, and the associated failure modes. The theoretical moment-curvature relationship and the load-displacement response of the strengthened beams and control beams were predicted by using FEA software ANSYS. Comparison has been made between the numerical (ANSYS) and the experimental results. The results show that the strengthened beams exhibit increased flexural strength, enhanced flexural stiffness, and composite action until failure. In this investigation CPRP strengthened beam gives appreciable ductility when compared to control beam.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call