Abstract
The ever-increasing rail pressure in diesel engines may cause the injection induced shock waves. In the present study, different gases (N2 and CO2) were used as the ambient mediums in order to understand the effect of shock waves induced by the high-speed jets on the near-field spray penetration. The tests were carried out in an optically-accessible constant volume vessel and a single-hole diesel injector was used. The injection pressure ( Pinj) ranged from 80 to 150 MPa and the ambient density ( ρambient) are 11.25, 22.52, and 33.81 kg/m3, respectively. Schlieren imaging was used to capture the shock waves ahead of the sprays with a frame speed of 100,000 fps and high-speed imaging was used to capture the spray penetration evolution with a frame speed of 300,000 fps in order to provide sufficient high temporal and spatial resolutions of the spray development. Shock waves can be observed under CO2 atmosphere over all the tested conditions and almost invisible under N2 atmosphere. The timings of occurrence and detachment of the shock waves are advanced with the increase in ρambient, but less sensitivity to Pinj. The difference in penetration lengths for N2 and CO2 atmosphere are not consistent as Pinj and ρambient varied, indicating the complicated role of shock waves in influencing the spray behaviors. Several mechanisms for the generation of shock waves were discussed, as well the physical meaning of the timing to the peak velocity of the spray tip with breakup time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.