Experimental investigation of weir instability in main vessel cooling system of 1/4 FBR model

Abstract

The 500 MWe Prototype Fast Breeder Reactor (PFBR) is under construction at Kalpakkam, India. The main vessel of this pool type reactor acts as the primary containment in the reactor assembly. In order to keep the main vessel temperature below creep range and to reduce high temperature embrittlement and also to ensure its healthiness for 40 years of reactor life, a small fraction of core flow (0.5 m 3/s) is sent through an annular space formed between the main vessel and a cylindrical baffle (primary thermal baffle) to cool the vessel. The sodium after cooling the main vessel overflows the primary baffle (weir shell) and falls into another concentric pool of sodium separated from the cold pool by the secondary thermal baffle and then returned to cold pool. The weir shell, where the overflow of liquid sodium takes place, is a thin shell prone to flow induced vibrations due to instability caused by sloshing and fluid–structure interaction. A similar vibration phenomenon was first observed during the commissioning of Super-Phenix reactor. In order to understand the phenomenon and provide necessary experimental back up to validate the analytical models, weir instability experiments were conducted in a 1:4 scale stainless steel (SS) model installed in a water loop. The experiments were conducted with flow rate and fall height as the varying parameters. The experimental results showed that the instability of the weir shell was caused due to fluid structure interaction. This paper discusses the details of the model, the modeling laws, similitude criteria adopted, analytical prediction, the experimental results and conclusion.