Abstract
An experimental facility was constructed to study two-phase flashing flows of binary mixtures in a converging–diverging nozzle (Venturi tube). The effects of mass flow rate, concentration of the volatile component in the liquid phase and inlet sub-saturation (overpressure) on the axial distribution of static pressure are discussed. A transparent test section enabled visual observation of the two-phase flow in the Venturi by means of high-speed visualization (HSV) and a quantitative assessment of the velocity field was carried out using particle image velocimetry (PIV). Experimental results generated for mixtures of R-134a (volatile component) and POE ISO 10 lubricating oil (non-volatile component) showed that the liquid phase viscosity has a significant effect on both the throat pressure drop and pressure recovery in the diverging section, with the latter being directly proportional to the refrigerant concentration in the liquid phase. Visual analysis of bubble cavitation in the converging–diverging nozzle revealed that the occurrence of two-phase flow in the throat and downstream of it was quite sensitive to changes in the conditions of the flow, which quickly evolved into a homogeneous frothy mixture when the drop in pressure at the throat exceeded a certain limit.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.