Experimental Investigation of Traditional Clay Brick and Lime Mortar Intended for Restoration of Cultural Heritage Sites

Abstract

To properly restore masonry cultural heritage sites, the materials used for retrofitting can have a critical effect, and this requires standards for traditional Korean brick and lime mortar to be examined. This study experimentally investigated the material characteristics of Korean traditional bricks and two types of lime mortar (quicklime lumps and powdered hydrated lime) and the strength of masonry specimens made from those materials. Four different mixing ratios of lime, sand and white cement were considered as material parameters in this study. The experiment included uniaxial compressive testing and flexural testing to examine the mortars’ mechanical properties, and compression tests, triplet shear tests and diagonal compression tests for the masonry specimens. The results found that the strength of the masonry specimens was not necessarily associated with the mortar’s strength, but rather the cohesion between brick and mortar. In the material test, adding white cement had no noticeable effect on mortar strength. Meanwhile, in the masonry specimen, the effect of the added white cement was significant in terms of compressive and shear strength. This suggests that the bonding ratio between mortar and brick, which is an important factor influencing the behavior of bricks, was stronger with the addition of white cement. Furthermore, it was found that quicklime lumps had a lower strength than powdered hydrated lime. The test specimen with white cement added to powdered hydrated lime exhibited the greatest strength.