Abstract
This paper investigates the high strain rate transverse compression behavior of Kevlar® KM2 and ultra high molecular weight polyethylene Dyneema® SK76 single fibers widely used in protective components under ballistic and blast loading conditions. The micron scale fibers are compressed at strain rates in the range of 10,000–90,000 s−1 in a small (283 μm) diameter Kolsky bar with optical instrumentation. The nominal stress–strain response of single fibers exhibits nonlinear inelastic behavior under high rate transverse compression. The nonlinearity is due to both geometric and material behavior. The contact area growth at high rates is found to be smaller than at quasi-static loading leading to a stiffer material response at higher rates. The fiber material constitutive behavior is determined by removing the geometric nonlinearity due to the growing contact area. Atomic force microscopy analysis of the compressed fibers indicates less degree of fibrillation at high strain rates compared to quasi-static loading indicating that fibril properties and inter-fibrillar interactions could be strain rate dependent.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
