Abstract

In this study, we experimentally investigated the best ignition timing in an SI engine using an E85 ethanol blend by altering the timing angle with respect to gasoline use regarding the output performance parameters such as power and efficiency. We also determined the energy distribution of the engine. The experiments were carried out on a 4-stroke, 4-cylinder spark ignition engine, and the excess air coefficients were almost all maintained at approximately unity. To achieve this, the fuel orifice holes of the carburettor were suitably enlarged for the E85 ethanol blend. The ignition timing was successively delayed in 2° increments up to 6° (denoted as −2, −4, −6, respectively) and then successively advanced by 2° up to 6° (denoted as +2, +4, +6, respectively) with respect to the advance values used with gasoline (called the “original advance values”) at full load operation. The best performance and emissions were obtained with +4. Advanced ignition timing resulted in an increase in NOx emissions, while CO and CO2 remained relatively unaffected. Increasing the delay in ignition timing caused poorer combustion and hence more HC emissions and fuel consumption.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.