Abstract

Rock fragmentation by blasting influences ore recovery and the cost of downstream operations. The development of electronic detonators makes it possible to improve fragmentation by controlling the initiation timing in blasting projects, and the effect of the mechanism of delay timing on rock fragmentation should be studied. Fragmentation of granite bench specimens with different initiation timing was investigated in blast experiments. Conclusions are obtained by studying the surface strain field and post-blast specimens. A total of six blasting tests were carried out on granite bench specimens with four boreholes each having a diameter of 10 mm and a length of 450 mm. Each borehole used pentaerythritol tetranitrate (PETN) as the explosive charge, which was approximately 4.84 g with a charge diameter of 5.5 mm. Delay times between adjacent boreholes in the same row were set as 0, 50, 100, 150, 200, and 250 µs. The surface strain field of the bench specimen under blast loading was analyzed using three-dimensional digital image correlation (3D-DIC) techniques based on two cameras that captured high-speed images. Additionally, the post-blast specimen was also observed and recorded. Fragments of each bench specimen were carefully collected, weighed, and sieved with a set of sieves, including very fine particles. According to the 3D-DIC analysis for bench specimens, the propagation pattern of the main strain concentration zone transformed from horizontal to vertical with the increase in inter-hole delay. The maximum blast excavation weight was obtained by the bench specimen with an inter-hole delay of 100 µs, while the bench specimen with the longest inter-hole delay (250 µs) obtained the minimum blast excavation weight. By combining the results for blast excavation weight with the results from fragment size distribution analysis of all specimens, the optimal inter-hole delay was 200 µs. Compared to simultaneous detonation, the median size was decreased by about 14.5% for the inter-hole delay of 200 µs. The results of experiments show that delay time significantly influences rock fragmentation, but the stress wave superposition in short delays cannot improve rock fragmentation. For long delays, the blast-induced crack propagation time should be regarded as an influential factor when choosing the proper delay time. The experimental findings of this study could provide a better understanding of the effect of the mechanism of delay time on rock fragmentation.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call