Abstract
This study experimentally investigates the effect of surface roughness on the hydrodynamic and thermal performance of microchannel evaporators. Three micro-evaporators of the same dimensions and different surface roughness have been fabricated by micro-WEDM. Each micro-evaporator consists of forty rectangular microchannels of 700μm height, 250μm width, and 19mm length. A microscale vapor compression refrigeration cycle has been constructed to carry out the experiments. R134a is used as the refrigerant. Heat transfer coefficient, pressure drop and COP results are presented at variously imposed heat fluxes, and at mass fluxes of 85 and 200kg/(m2s). The results demonstrate up to 45% enhancement in the two-phase heat transfer coefficient at low to moderate heat flux values as the surface roughness increases. Considering the surface roughness effect of the microchannel walls, a new correlation is developed to predict the heat transfer coefficient of R134a boiling in microchannels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
