Abstract

Two perforated plates with different solidity ratios, S=50% and 67%, were used to investigate the effect of the velocity fluctuations of a subsonic gaseous crossflow on the spray characteristics of a liquid jet including droplet size and velocity distributions. The experiments were conducted over a range of jet-to-crossflow momentum flux ratio of q=16.5-172, and two gas Weber numbers of Weg=2.7 and 5.9, corresponding to the enhanced capillary breakup and bag breakup regimes, respectively. The experimental results of this study revealed that the distribution of droplets size associated with a turbulent and a uniform crossflow for each specific breakup regime were approximately identical. The bimodal and single peak distributions of droplets size, respectively, associated with enhanced capillary and bag breakup regimes were generally consistent with the literature reports. However, the transition of the liquid primary breakup regime from enhanced capillary to bag breakup mode was delayed in a turbulent crossflow compared to its uniform counterpart. The general behavior of droplets size-velocity profiles were also consistent with the literature reports. Nonetheless, complex variations in the distribution of droplets velocity when changing the crossflow turbulence intensity were observed and linked with the presence of instabilities on the liquid jet's surface. Finally, the present experiments allowed shedding more light on the reason why the breakup mechanisms of a liquid jet in a conventional uniform crossflow should not be generalized to predict the distinct breakup process of a liquid jet in a turbulent crossflow.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.