Abstract

Abstract In this research, the performance of a stepped solar still has been experimentally evaluated. For this purpose, a parabolic trough collector has been used to preheat the saline water entering the solar still. Also, two flat external reflectors have been employed to increase the amount of solar energy received by the steps and the collector of the system. The findings of this research indicate that the use of two flat external reflectors is more effective than using the trough collector. Also, it is more efficient to apply both mechanisms simultaneously than to use them separately. According to the obtained results, the distilled water output of the solar still is 760, 1,560, 2,440 and 2,760 ml/m2, respectively, for operating the conventional solar still, using the trough collector, using the two flat external reflectors, and using the collector and reflectors simultaneously. The electrical conductivity due to the presence of salt and chemical substances dissolved in the distilled water discharged from the still is 255, 215, 62 and 38 micro Siemens per centimetre, respectively, for each of the four mentioned cases. These experiments show that by applying the proposed mechanisms, the amount of distilled water can be increased, and its purity can be enhanced.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call