Abstract
The accumulation of ice on the aero-engine inlet compromises engine safety. Traditional hot air anti-icing systems, which utilize bleed air, require substantial energy, decreasing engine performance and increasing emissions. Superhydrophobic materials have shown potential in reducing energy consumption when combined with these systems. Research indicates that superhydrophobic surfaces on stationary components significantly reduce anti-icing energy consumption by altering runback water flow behavior. However, for rotating aero-engine components, the effectiveness of superhydrophobic surfaces and the influence of surface wettability on runback water flow remain unclear due to centrifugal and Coriolis forces. This study investigates the runback water flow behavior on aero-engine rotating spinner surfaces with varying wettabilities in a straight-flow spray wind tunnel. The results demonstrated that centrifugal force reduces the amount of runback water on the rotating spinner compared to the stationary surface, forming rivulet flows deflected opposite to the direction of rotation. Furthermore, wettability significantly affects the flow characteristics of runback water on rotating surfaces. As the contact angle increases, the liquid water on the rotating spinner transitions from continuous film flow to rivulet and bead-like flows. Notably, the superhydrophobic surface prevents water adhesion, indicating its potential for anti-icing on rotating components. In addition, the interaction between rotational speed and surface wettability enhances the effects, with both increased rotational speed and larger contact angles contributing to higher liquid water flow velocities, promoting the rapid formation and detachment of rivulet and bead-like flows.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.