Experimental investigation of rigid confinement effects of radial strain on dynamic mechanical properties and failure modes of concrete

Abstract

In this study, to confirm the effect of confining pressure on dynamic mechanical behavior and failure modes of concrete, a split Hopkinson pressure bar dynamic loading device was utilized to perform dynamic compressive experiments under confined and unconfined conditions. The confining pressure was achieved by applying a lateral metal sleeve on the testing specimen which was loaded in the axial direction. The experimental results prove that dynamic peak axial stress, dynamic peak lateral stress, and peak axial strain of concrete are strongly sensitive to the strain rate under confined conditions. Moreover, the failure patterns are significantly affected by the stress-loading rate and confining pressure. Concrete shows stronger strain rate effects under an unconfined condition than that under a confined condition. More cracks are created in concrete subjected to uniaxial dynamic compression at a higher strain rate, which can be explained by a thermal-activated mechanism. By contrast, crack generation is prevented by confinement. Fitting formulas of the dynamic peak stress and dynamic peak axial strain are established by considering strain rate effects (50–250 s−1) as well as the dynamic confining increase factor (DIFc).