Experimental investigation of radiation heat transfer in coolant channel under impaired cooling scenario for Indian PHWR

Abstract

Postulated accidents like large break LOCA leads to expulsion of coolant in the primary heat transport system thus voiding of reactor core initially. However, the reactor is shut down at the onset of LOCA along with coolant injection from ECCS to remove the decay heat of 2–3% of nominal power. Further postulation of failure of ECCS leads to rapid increase in the temperature of fuel pins and the coolant channel as well. The moderator present around coolant channels limits the rise in temperature. The assessment of temperature distribution in the fuel pins of the bundles of a channel under high temperature is quite important from hydrogen generation and fission product release point of view. A pseudo steady state experiment has been carried out to obtain the temperature distribution of different components of a simulated coolant channel for large capacity Indian pressurized heavy water reactor. The experiment simulates a postulated LOCA with Loss of ECCS scenario for the coolant channel. The experimental results shows that for 1% decay power the simulated fuel pins attained a maximum pseudo steady state temperature of 900 °C–1000 °C, thus establishing moderator as a heat sink. An insignificant circumferential temperature variation in the channel components is observed which indicates weak effect on natural convective heat transfer within coolant channel. Estimation shows that around 85 percent of total decay heat provided through electrical power is removed by the moderator.