Abstract
First gas-lubricated compliant foil bearings (CFBs) were built in the 1950s. Due to their significant advantages, such as oil-free operation, good tolerance to bearing misalignment and very low maintenance, they have been penetrating the bearing applications for high speed compressors, air-cycle machines and gas turbines. The work presented here investigates a novel idea of water-lubricated compliant foil bearings, which could be used in applications where environmentally friendly lubrication is desired, for example in hydroelectric turbines or water pumps. Experimental results collected for three prototype water-lubricated foil journal bearings are presented. The tests were conducted under steady radial load and with the sliding speed varied incrementally. A sequence of design improvements is presented, with the best bearing demonstrating friction coefficient of about 0.01 at the sliding speed of about 4 m/s and the radial load of about 300 kPa. Encountered difficulties, research methodology and the testing equipment are also described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
