Abstract
Micro-magnetofluidics offers a promising tool to regulate the drop formation process with versatile applications in engineering and biomedicine. In the present study, on-demand ferrofluid drop generation at a T-junction is investigated utilizing a magnetic pulse. Also, a novel method for ferrofluid droplet formation is introduced using a non-uniform Pulse-Width Modulation (PWM) magnetic field. A novel mechanism of drop generation named “beating regime” was seen for the first time in which the ferrofluid moves back and forth before the breakup. The effect of the magnetic induction, continuous phase flow rate, duty cycle, and applied frequency on the generation frequency and drop diameter was investigated under the PWM magnetic field and compared with those under the DC magnetic field. The results showed that greater values of drop diameter and generation frequency are obtained either when the magnetic induction and/or duty cycle increases or when the applied frequency decreases. The regime maps of ferrofluid droplet formation were presented for different magnetic Bond and Capillary numbers under both PWM and DC magnetic fields and compared with each other. Finally, a correlation was presented to estimate the dimensionless drop diameter on the basis of four nondimensionalized parameters, showing a 7.2 % average relative error.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
