Abstract
This paper investigates large-scale sandwich panels (9,145×2,440×78 mm) subjected to out-of-plane loading. The panels comprise glass-fiber-reinforced polymer (GFRP) skins connected by orthogonal GFRP ribs and a polyurethane foam core. The lightweight insulated panel is supported at three levels along its 9,145-mm height and is proposed for cladding of buildings, where the main loading is caused by wind. A full-scale panel was tested under uniform air pressure by using a specially designed setup equipped with pressure load actuators. The panel failed at 7.5 kPa, 2.6 times the factored design pressure for the windiest region in Canada. Failure occurred by outward wrinkling and crushing of the GFRP compression skin near the middle supports. The deflection under the maximum design service wind pressure did not exceed span/360. Another test was carried out on a different specimen by using conventional mechanical loading. It confirmed the ultimate strength of the panel and also revealed a successive failure re...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
