Abstract
Parameter optimization is the active subject of research, and in this current work the ferrite number and gas tungsten arc (GTA) welding SS. Filler material. Models have been developed by welding SD316L slab with NiTinol wire (shape memory alloy) as a filler material by conducting experiments using three-factor, three level factorial designs. Tests have been conducted for various models at UTM and the results are scheduled. The final models were upgraded using the design expert method. It can be seen from the investigation that the interactive effect of the process parameters has a significant effect on the tensile strength and the ferrite number.
Highlights
Case tungsten arc welding (GTAW), often referred to as TIG welding, has become a popular choice of welding processes when high quality, precision welding is required
The final models were upgraded using the design expert method. It can be seen from the investigation that the interactive effect of the process parameters has a significant effect on the tensile strength and the ferrite number
Li et al [5,6] conducted laser brazing of NiTi SMA and stainless steel with Ag-based filler metal, Capacitor discharge welding, microplasma arc welding done by Qiu [7] and laser welding done by Li [8] of NiTi SMA to stainless steel wires were investigated
Summary
Case tungsten arc welding (GTAW), often referred to as TIG welding, has become a popular choice of welding processes when high quality, precision welding is required. Stiffness and other properties of nitrite can be controlled by chemical composition, heat treatment and temperature [3] and Shabalovskaya et al, [4] Explored bio-compatibility and found its application in the form of stents and guide wires in medical devices. Li et al [5,6] conducted laser brazing of NiTi SMA and stainless steel with Ag-based filler metal, Capacitor discharge welding, microplasma arc welding done by Qiu [7] and laser welding done by Li [8] of NiTi SMA to stainless steel wires were investigated. An attempt has been made to explore the precision welding process of TIGs with their tensile properties and ferrite number as a filler material for welding steel 316L slab with nitinol wire
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Global Journal of Engineering and Technology Advances
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.