Experimental investigation of conductive heat transfer and fire protection in a polymer-based plate heat exchanger

Abstract

Polymer-based heat exchangers offer several attractive features for thermal management applications such as low-cost, lightweight, antifouling, and anti-corrosion characteristics. However, their thermal performance is compromised primarily by the low thermal conductivity and high-flammability. This work consists of developing new polymer-based plate heat exchangers, which are made from epoxy resin reinforced by banana fibres and manufactured using the vacuum bag resin transfer moulding technique. The aim of this research is to improve both the heat transfer efficiency and thermal protection. The proposed approach involves incorporating silicon carbide powder as charge into samples to increase their thermal conductivity, and applying an intumescent fire-retardant coating to improve their capacity to withstand heat and flames. To determine the efficacy of this approach, a cone calorimetry test was performed to examine the thermal distribution within the plate heat exchanger samples and to assess fire reaction parameters during a fire scenario. The results revealed a notable increase in thermal conductivity, due to the addition of silicon carbide powder. Furthermore, the intumescent fire-retardant coating substantially improved the samples’ thermal resistance. This result has been verified by thermogravimetric analysis conducted during this work. These findings suggest that using banana fibres-reinforced epoxy resin, combined with silicon carbide powder and intumescent fire-retardant coating, has the potential to enhance the overall thermal performances of plate heat exchangers. The addition of silicon carbide powder increases the thermal conductivity by 36%. This demonstrates the feasibility of utilizing sustainable and biodegradable materials to manufacture heat exchangers that are more efficient and eco-friendly.