Abstract
A current concern of researchers from the Experimental Pilot Plant for Tritium and Deuterium Separation (PESTD) within the National R&D Institute for Cryogenics and Isotopic Technologies in Rm. Valcea is the solution of a combined electrolysis catalytic exchange (CECE) isotopic separation process that aims to be part of a new liquid waste decontamination technology. The experimental installation, defined as module M1100, has interfaces with the PESTD process and auxiliary systems and is placed within the PESTD area. The installation has its own automation and control system that allows for safe operation. Two operating modes are presented. The first mode is in “open-circuit” mode to evaluate the individual separation performances of the two technological processes, water electrolysis and water-hydrogen catalytic isotopic exchange, respectively. The second mode is in “closed loop,” which corresponds to the CECE isotopic separation process where the tritium/deuterium are concentrated in the water within the electrolyzer. The preliminary experimental investigations were performed with low-concentrated tritiated water (HTO; ~100 Bq/l] in order to have a reduced degree of contamination as the concentration of the processed water was increased (~1000 Bq/l). The evaluation of the separation performances was made by comparing correlations from direct measurements with the calculated ones provided by the software developed for the CECE isotopic separation process in the open-circuit operating mode. For the closed-loop operation mode, the data provided by the calculation program for the representation of the nonstationary CECE isotopic separation regime were compared with the measured data. The preliminary results show a good correlation between the measured and the calculated data considering these experiments were carried out mainly in order to improve the operating performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.