Experimental investigation of a speed‐sensor‐less IM drive system under Inverter fault‐tolerant control

Abstract

This paper proposes an algorithm for fault tolerance of three‐phase, inverter‐fed, speed‐sensor‐less control of a three‐phase induction motor drive system. The fault tolerance of the inverter when one switch is open or one leg of six‐switch inverter is lost is considered. The control of the drive system is based on indirect rotor field‐oriented control theory. Also, the speed estimator is based on model reference adaptive system (using stator current and rotor flux as state variables for estimating the speed). The fault‐tolerant algorithm is able to adaptively change over from a six‐switch inverter to a four‐switch inverter topology when a fault occurs; also, it makes a smooth transition of the motor speed, torque, and current when changing over from a faulty condition to a new healthy status, which is four‐switch three‐phase inverter (FSTPI) topology; thus, the six‐switch three‐phase inverter (SSTPI) topology (pre‐fault status) is almost retained for the medium‐power range of induction motor applications. The proposed algorithm is simulated by using the MATLAB/SIMULINK package. Also, the proposed control system is tested experimentally using a digital signal processor (DSP1104). The obtained results from the simulation model and experimental system demonstrate the performance enhancement and good validity of the fault‐tolerance control for the speed‐sensor‐less induction motor drive system. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.