Abstract

In this paper, air entrapment during slamming is an investigation subjected to an experimental method of inquiry, analysed alongside a theoretical approach obtained from previous attempts to address similar matters. The experiment consisted of assembling three different sizes and depths of artificially created pockets underneath the 1:75 deck model of a 76 m × 76 m prototype to encourage air entrapment and study how this entrapped air affects local and global loads. A parametric study is ultimately conducted on the geometry of the pocket, altering area and depth to observe the response to the pressure. Air entrapment effects were observed to reduce the magnitudes of impact pressure inside the pocket while slightly altering the force time histories in x and z-directions. Force magnitudes for global forces are significantly close to the smooth deck results. However, horizontal force data are slightly higher than their corresponding smooth deck due to additional surfaces inside the pocket. In addition, a parametric study of the depth and size of the pocket reveals that pocket depth is the dominant parameter that affects the impact pressure inside a pocket.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call