Experimental investigation for the operational performance improvement of cryogenic piston-type pump using subcooling effect for liquid hydrogen stations

Abstract

This paper investigates the impact of subcooling degree and exhaust pressure on the performance of a high-pressure piston pump for pressurizing cryogenic liquid. We fabricate a lab-scale cryogenic liquid pump, conduct experiments with liquid nitrogen, and observe the significant effect of subcooling changes on the pump performance. The lab-scale pump achieves up to 30 bar of exhaust pressure and up to 45.4 g exhaust mass per cycle. This paper introduces the concept of duty cycle for the exhaust mass as a measure of pump performance. The results show that as the subcooling degree and the exhaust pressure increase, the duty cycle and the exhaust mass also increase, improving the pump performance. However, the increase in performance does not happen proportionally, and an optimal subcooling degree must be selected. This paper establishes a generalized computational model to predict the pump performance, achieving the mean absolute errors of 1.8 bar and 0.3 g/s in pressure and mass flow rate, respectively. The model can predict the exhaust mass during one stroke cycle of the pump with an approximation error of 10 %. In addition, the model predicts that pressurizing liquid hydrogen to 900 bar requires subcooling degree and its duty cycle cannot reach 100 % by reduction of specific volume. The findings suggest that subcooling can be used to enhance cryogenic liquid pump performance, and the optimal subcooling degree can be determined during the design of piston pumps to achieve high pressure.