Abstract
A real-scale latent heat thermal energy storage (LHTES) device has been designed and set up for air-cooling in the housing sector. This system uses the thermal gap between night-time and daytime outdoor air to refresh the indoor air. The air passes along a box-section horizontal tube bundle filled with paraffin wax (phase change material). To develop a design tool, a one-dimensional model is proposed which describes the thermal behaviour of the LHTES device as the paraffin wax melts. This model takes into account the close-contact exchange between the PCM and the surface of the tubes due to the decreasing density of the PCM as it melts, and the corresponding buoyancy phenomenon. An enthalpy formulation is used for the PCM energy balance equation. An experimental study is performed which validates the modelling approach. This model will be used to simulate the LHTES devices of two single family houses (Napevomo, Sumbiosi). Finally, a first illustrative application of the simulation model of LHTES device is developed by coupling it with a basic mono-zone building performance programme.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
