Experimental factors affecting in vitro recovery of puerarin in microdialysis

Abstract

: To analyze experimental factors affecting in vitro recovery of puerarin in microdialysis. : Puerarin concentration in microdialysate samples was determined by high performance liquid chromatography. The methods of direct dialysis, retrodialysis and the zero-net flux were used to calculate in vitro recovery, respectively. The effects of perfusate composition, the analyte concentration, perfusate flow rate, medium temperature and stir rates of the dialysis medium on recovery were investigated. : There were significant differences in the recovery values among direct dialysis, retrodialysis and zero-net flux methods. The recovery for 0.9% NaCl solution, Ringer's solution, PBS and anticoagulant dextrose solution as perfusate fluid were (71.25±2.36)%,(73.48±1.41)%,(68.50±2.43)% and (74.98±1.16)%, respectively. The composition of perfusate fluid had significant influence on the recovery(P<0.01). At the same flow rate, recovery was independent of the analyte concentration. At the same concentration, the recovery was decrease with the increasing flow rate in an exponential relationship. The recovery increased with the raising temperature and stir rate of the dialysis medium, and the recovery remained stable when the stir rate reached above 200 rpm. : A study method for in vitro recovery of puerarin in microdialysis has been established, and the recovery of puerarin is affected by calculating methods, perfusate fluids, flow rate, medium temperature and stir rate, but not affected by analyte concentrations.