Abstract
PurposeTo determine static friction coefficients between rapid tooled materials and thermoplastic materials to better understand ejection force requirements for the injection molding process using rapid‐tooled mold inserts.Design/methodology/approachStatic coefficients of friction were determined for semi‐crystalline high‐density polyethylene (HDPE) and amorphous high‐impact polystyrene (HIPS) against two rapid tooling materials, sintered steel with bronze (LaserForm ST‐100) and stereolithography resin (SL5170), and against P‐20 mold steel. Friction tests, using the ASTM D 1894 standard, were run for all material pairs at room temperature, at typical part ejection temperatures, and at ejection temperatures preceded by processing temperatures. The tests at high temperature were designed to simulate injection molding process conditions.FindingsThe friction coefficients for HDPE were similar on P‐20 Steel, LaserForm ST‐100, and SL5170 Resin at all temperature conditions. The HIPS coefficients, however, varied significantly among tooling materials in heated tests. Both polymers showed highest coefficients on SL5170 Resin at all temperature conditions. Friction coefficients were especially high for HIPS on the SL5170 Resin tooling material.Research limitations/implicationsApplications of these findings must consider that elevated temperature tests more closely simulated the injection‐molding environment, but did not exactly duplicate it.Practical implicationsThe data obtained from these tests allow for more accurate determination of friction conditions and ejection forces, which can improve future design of injection molds using rapid tooling technologies.Originality/valueThis work provides previously unavailable friction data for two common thermoplastics against two rapid tooling materials and one steel tooling material, and under conditions that more closely simulate the injection‐molding environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
