Abstract
The discharge of organic contaminants such as phenol and its derivatives emerging from the industries into water has become a critical concern. In present research, potential of nanoscale iron particle and iron powder has been tested for the removal of 2-chlorophenol from aqueous solutions. In this research, nano particles were procreated by reduction of ferric iron in presence of sodium borohydrid. The characterization of synthesized particles was carried out using SEM and XRD analysis. The effect of pH, initial concentration of chlorophenol, and contact time and sorbents dosage on 2-CP removal was investigated. A statistical experimental design based on “central composite design” was exerted for measure the effect of these variables. The results of the CCD predicted that the maximum adsorption of 2-CP (100%) by nZVI could be achieved at pH, initial concentration, time, and dosage of sorbent as 4, 5.0 mg/L, 70 min, and 1.33 g, respectively. Also, for 86.74% removal of 2-CP, initial concentration, pH, contact time and Fe powder dosage were 5.0 mg/L, 3.23, 56.92 min and 2.50 g respectively. The results show that the nZVI can be applied for treatment of organic contaminants in water and wastewater. Also, the optimum conditions of these theoretically obtained variables are beneficial for their monitoring which can be applied at an industrial-scale process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Environmental & Analytical Toxicology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.