Abstract
A four-channel, upstream, digital filter multiple access (DFMA) passive optical network (PON) is experimentally demonstrated for the first time in a 26 km single mode fiber (SMF) intensity modulation and direct detection system employing real-time optical network units (ONUs) and optical line terminal (OLT), which are dynamically reconfigurable in terms of channel spectral allocation and signal modulation parameters. To combat physical channel frequency response-induced cross channel interference (CCI) between spectrally overlaid orthogonal channels, a real-time, reconfigurable CCI cancellation (CCIC) function implemented in the OLT receiver digital signal processing (DSP), is demonstrated to significantly improve the DFMA PON performance and robustness in terms of significant reductions in total channel bit error rates (BERs) and individual subcarrier BERs, substantial increases in channel capacities, considerably reduced sensitivity to ONU synchronization, and excellent transparency to the interfering channel's signal modulation format. The tradeoff between the complexity of the CCIC function's filter, in terms of tap count (multiplier elements) and the DFMA PONs performance is optimized to determine the optimum tradeoff. It is shown that the CCIC filter only requires as few as 42 taps to achieve excellent CCIC performance. We also fully analyze the DSP complexity of the transmit and receive DFMA filters and the CCIC filters for varying DFMA channel counts and varying ratios of AD/DA converter sample rate to digital logic clock rate (parallelization factor). It is shown that DFMA filter complexity is independent of channel count and furthermore that for channel counts ≥ 4 the CCIC filter only needs to process ~10 interference-inducing samples per wanted signal sample, resulting in only ~10 multipliers per parallel filter in the CCIC filter. We have therefore successfully demonstrated an ultra-low complexity, real-time CCIC function, which considerably enhances the performance and robustness of DFMA PONs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.