Experimental Deformation of Unconsolidated Quartz Sands, Examining the Effects of Grain Sorting on Deformation Band Formation Within Mixed Aeolian-fluvial Reservoirs

Abstract

Deformation bands are the main structural element of fault damage zones within sandstone reservoirs. The prediction of band occurrence and their petrophysical impacts is based largely on the understanding that the yield and deformation mechanism of sandstones is primarily controlled by porosity and mean grain size. Whilst this is supported by field observations within aeolian successions, where bands are predictably favoured within coarse-grained, high-porosity sandstones, the prediction of deformation bands within texturally complex mixed aeolian-fluvial reservoirs on the basis of porosity and grain size alone, may be unreliable. The effect of grain sorting on the mechanical behaviour of sandstones is not well understood, although it is generally regarded that deformation band formation is inhibited in texturally immature sandstones with a poor level of sorting. We examine the effect of sorting on both the inelastic yield of sandstones, the dominant deformation mechanism by which yield occurs, and the textural and microstructural changes with deformation, using a series of triaxial experiments on unconsolidated quartz sands. Hydrostatic experiments were conducted on over-consolidated samples of very well- to moderately-sorted sands with a range of mean grain sizes from 128-700µm. We report accurate prediction of P* using porosity x grain radius, with P* reduced with decreased sorting. Constant displacement rate triaxial experiments are performed at up to 10% axial strain to explore yield behaviour in both the brittle dilatant regime and shear-enhanced compactive regime. Experiments were repeated with systematically varied grain sorting whilst mean grain size and porosity was maintained. The textural and petrophysical changes are observed and quantified using pore volumometry, back scattered electron microscopy, digital image analysis and point counting. Results show that in well-sorted sands, localised cataclasis and deformation band formation is the dominant deformation mechanism. In poorly-sorted sands deformation occurs through a combination of grain boundary sliding and randomly distributed pockets of cataclasis. Using grain size analysis we identify greater levels of cataclasis and production of fines in well-sorted sands, resulting in permeability reduction up to one order of magnitude more than that of poorly-sorted sands deformed at the same conditions. We hypothesise that band formation within poorly sorted sandstones may be promoted by the formation and propagation of bands in adjacent well sorted sandstones where band formation is favoured. These results give insight into the deformation, textural changes, and permeability impact of both unconsolidated and consolidated siliciclastic reservoirs.