Experimental deepwater culture of the Sydney rock oyster ( Saccostrea commercialis). VI. Commercial oyster cage systems

Abstract

A growout cage that retains oysters, excludes predators and reduces maintenance is described; it is cut from 200 mm (8 in) steel reinforcing mesh as kitset units and then hot dip galvanised. Each cage is 2.2 m long, 0.8 m wide and 1.0 m deep (88 × 22 × 40 in) and contains five floors which are 203 mm (8 in) apart. The floors and the walls are covered with 19 mm ( 3 4 in) galvanised wire mesh, or high density polyethylene plastic mesh. These cages may be slung from rafts, fitted with individual flotation or lowered to the bottom with a marker buoy; they weigh approximately 70 kg (154 lb) empty and about 220 kg (484 lb) when harvested. Each cage crop consists of approximately 2.5 bags totalling about 150 kg (330 lb), and in good growing areas three to four crops have been harvested from each cage per year. In two such crops culled spat (22–29 g whole wet weight) were converted to plate (first grade) oysters (40–67 g); in the other two, seconds (29–40 g) were converted to plate oysters. Growth rates, stocking densities and mortality data are given for 11 crops.