Experimental data for code validation: Horizontal air jets in a semicircular fluidized bed of Geldart Group D particles

Abstract

Experiments were conducted with 6 mm plastic beads (Geldart Group D) in a semi‐circular, gas‐fluidized bed with side jets. Attention was paid to particle characterization and bed measurements, making the resulting dataset ideal for CFD‐DEM validation and uncertainty quantification. The bed was operated slightly above and below the minimum fluidization velocity, with additional fluidization provided by one of two pairs of opposing jets located above the distributor near the flat, front face of the unit. Care is taken to report material properties and bed conditions with either measured distribution functions or uncertainty bounds. High‐speed video imaging and particle tracking velocimetry are used to extract bin‐averaged velocity profiles, which are used to extract jet penetration depths. The time‐averaged mean and standard deviation of the bed pressure drop is also reported. Finally, the lower jets are also inserted into the bed until the opposing jets merge to form a spout‐like pattern. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2351–2363, 2018