Abstract
Ethanol, an alternative fuels based on alcohol for spark ignition engines, can be used by mixing with gasoline at the proper ratios, and which reducing exhaust emissions by an increase in oxygen content. Although there are many studies conducted on the use of ethanol in internal combustion engines, no studies have been conducted on the use of ethanol in two-stroke uniflow gasoline engines so far. In this experimental study, performance, emission and combustion characteristics of ethanol/gasoline blends (range of ethanol 10% v–50% v) were examined in a two-stroke uniflow gasoline engine at 1800 1/min and full load. In cylinder pressures, heat release rates, mass fraction burnt, engine torque, break specific fuel consumptions, delivery ratio, scavenging efficiency, carbon monoxide (CO), hydrocarbon (HC), carbon dioxide (CO2) and nitrogen oxides (NOx) emissions were investigated. The combustion phasing was advanced after adding ethanol due to the higher burning velocity. Delivery ratio and scavenging efficiency have increased due to the faster evaporation of ethanol than gasoline. Break thermal efficiency (BTE) decreased because of the decreased net work, and break specific fuel consumption (BSFC) increased because ethanol had lower heating value (LHV) than gasoline. CO, HC, CO2 and NOx emissions decreased with the increase in the ethanol content in gasoline.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
