Experimental characterization of reflective coating material for cool roofs in hot, humid and dusty climate

Abstract

Considerable energy is used for cooling buildings in hot climates like those found in Gulf Cooperation Council (GCC) countries. Designing building envelopes for the purpose of saving energy can necessarily help reduce the building's operating expenses and therefore energy demand over time. For roofing systems, a research project was recently conducted to assess experimentally and numerically the performance of the roofing systems. This paper presents the experimental results of this project. Cool/reflective/white roofs use reflective materials or coatings to reflect a portion of the incident solar radiation. This results in lowering the surface temperature of the cool roofs compared to black roofing systems. As such, cool roofs help reduce the cooling loads during the summer season. This paper presents the test results of characterizing the short-wave solar reflectivity of a reflective roofing material that can be used in cool roofs of Saudi buildings. A Reflective Coating Material (RCM) that is commercially available in the GCC markets was used in this study. Also, the reduction in the solar reflectivity due to dust and dirt accumulations on the surface of the RCM was investigated in this study when this coating was exposed to a dusty and polluted climate of Jubail Industrial City (JIC). As well, the effect of applying different cleaning operations on the solar reflectivity of the RCM was investigated. The test results showed that dust/dirt can significantly contribute in reducing the short-wave solar reflectivity of the RCM. For the RCM subjected to the natural weathering conditions at different exposures times, the results showed that a maximum enhancement of 5% in the short-wave solar reflectivity was achieved, as a result of conducting air plowing process that simulates the wind action. Additionally, a maximum enhancement of 45% in the short-wave solar reflectivity was achieved as results of conducting water cleaning/rinsing process that simulates the rain action and as well conducting washing with dishwashing detergent that simulates homemade cleaning. Furthermore, conducting professional cleaning has resulted in insignificant enhancement in the short-wave solar reflectivity compared to conducting homemade cleaning. Finally, this paper provides a test procedure for characterizing the dust concentration/intensity on the surface of the RCM at different exposure times to the natural and polluted climate. This test procedure can easily be applied on different types of reflective roofing materials and membranes that can be used in cool roofs.