Abstract
To analyze the distribution pattern concerning multi-nozzle interference spray particle granularity between hydraulic supports, the present study conducts atomization interference experimental characterization for three types of nozzles used in coal mines based on a Doppler laser interference spray dust suppression simulation experimental system. The results indicate that for single-nozzle atomization, the impact of spray pressure on spray droplet size is gradually subdued, and a spray pressure of 8MPa yields the best result; compared with single-nozzle spray, the multi-nozzle atomization interference effect can downsize the spray field overlapping zone, leading to an improved uniformity of overall spray particle distribution. As the spray field overlapping coefficient k increases, the particle size of the interference spray field decreases first and then increases. As the spray field overlapping coefficient reaches 0.4, the distribution of spray droplet size is most concentrated, corresponding to the optimal atomized dust suppression effect. Practical testing indicates that the optimal spray field overlapping coefficient measured at a fully mechanized mining face agrees well with the experimental result. Under the optimal parameters, the average total dust and respirable dust suppression rates measured at various measuring points on the downwind side during support relocation reach 78.93% and 80.53%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.