Experimental characterization of a modified high-speed plasma synthetic jet actuator with oblique-slot exit

Abstract

In the field of flow control research, oblique jets are known to offer several advantages over vertical jets. To gain a comprehensive insight into the flow field characteristics of a plasma synthetic jet actuator with an oblique-slot exit, the related experiments are conducted. The experiment employed high-speed schlieren imaging techniques and electrical parameter measurements to acquire the flow field characteristics and discharge properties of the oblique-slot actuator, followed by a comparative analysis with a vertical circular orifice actuator. The oblique-slot plasma synthetic jet exhibits a wall-attaching effect and asymmetric flow characteristics, which differ from those of the vertical circular orifice actuator. The actuator generates a wall jet with an initial velocity of 389.5 ± 15.08 m/s, effectively propelling the fluid within the boundary layer. The Mach number of the precursor shock wave in the direction of the jet reaches 1.59, but decreases to just 1.02 in the opposite direction. Over a period in the range of 10–70 μs, the Froude number of the plasma jet decreases from 1841 to 238. The dominant role of the inertial force gradually weakens, while the influence of buoyancy increases, causing the jet boundary to move upward. The oblique-slot jet configuration represents a typical planar jet, exhibiting superior flow control uniformity compared with the vertical circular orifice jet. The results indicate that the high-speed oblique-slot plasma synthetic jet actuator designed in this study possesses distinct advantages over vertical circular orifice actuators for high-speed fluid flow control.