Experimental Behavior of L-Shaped and T-Shaped Cross-Laminated Timber to Evaluate Shear Walls with Openings

Abstract

There is increasing interest in using cross-laminated timber (CLT) in buildings because of its high strength and stiffness. In Japan, structural design guidelines for CLT buildings were established in 2016 and construction of mid-rise buildings is increasing. Wide-panel walls can exceed widths of 10 m and integrate cut-outs for window and door openings. However, under lateral loads, corner cracks at the openings have been the most prevalent failure mechanism. To investigate the initiation and propagation of corner cracks, a series of bendings are undertaken on L- and T-shape specimens extracted from the CLT panels. In addition, three-point bending and shear tests are also carried out on beam sections extracted from the CLT panels. Three types of brittle failure were observed: bending failure of the beam or column, and rolling shear failure.